Servosteel

Servosteel Academy

Engineering guides, technical tips and field insights on coil processing, roll forming and press feeding.

August 7, 20265 min read

What Is Roll Forming? The Process, the Limits and the Cost

What roll forming is, how the cold process works station by station, where it beats stamping, where it does not, and what drives the cost of a line.

August 4, 20267 min read

Where to Buy a Coil Line: What Distance Really Costs

Nearby manufacturer or Far East supplier: what distance actually costs you in customs, freight time, factory acceptance, service access, spares and conformity.

August 4, 20267 min read

What Does a Coil Slitting Line Cost? 8 Price Drivers

The 8 technical factors that set the price of a coil slitting line, the costs quotations leave out, and how to compare offers on the same basis.

August 3, 20266 min read

Six Ways to Cut Your Sheet Scrap Rate

Where scrap comes from on slitting and press lines, how to measure it, and which interventions actually reduce it — with worked examples.

August 2, 20265 min read

How to Choose a Servo Feeder: A Practical Guide

How to assess pitch accuracy, feeding speed, roller pressure, straightening need and press synchronization when selecting a servo feeder.

August 2, 20264 min read

How to Calculate Coil Weight and Length

Coil weight and strip length formulas, a step-by-step worked example, common mistakes and how the result drives line selection.

August 2, 20265 min read

How to Choose a Cut-to-Length Line: 6 Decisive Criteria

How to assess flatness, cutting unit, length tolerance, stacking and decoiler capacity when selecting a cut-to-length line.

July 30, 20266 min read

Solar Profile Line: How to Calculate the Payback

When does a solar profile line pay off? Investment threshold, annual capacity, value added per tonne and the payback calculation — step by step.

July 30, 20267 min read

How to Choose the Right Servo Feeder for a Progressive Die

6 criteria for choosing a servo feeder for a progressive die: pitch accuracy, error accumulation, pilot release timing, levelling and recipe memory.

July 29, 20266 min read

How to Choose a Coil Slitting Line: 7 Critical Criteria

The 7 criteria to check before buying a coil slitting line: coil capacity, thickness, knife clearance, levelling, recoiler tension and automation.

Let's design a line for your project

Send us your profile drawing or capacity requirements — our engineering team will get back to you within 48 hours.

Get a Quote +90 216 415 30 05