Applications
Energy
Energy is the fastest-growing application for coil processing. From solar plant structures to electrical distribution enclosures, a wide family of parts goes through the same core sequence: decoiling, levelling, forming, punching, cutting.
Parts produced
What we work on in the energy sector
Solar mounting profile
Complete roll forming lines for the C and post profiles used in solar plant structures.
Diagonal and bracing profiles
A separate line for the diagonal members of the mounting system; hole pattern and cut length are called from the recipe.
Cable tray
Perforated and plain cable tray lines — the punching unit sits inside the line, so no separate pressing step is needed.
Cable ladder
Ladder-type tray lines for heavy-duty cable management; side rails and rungs on separate stations.
DIN and terminal rail
Thin-gauge roll forming lines for the DIN rail profiles inside electrical enclosures; section tolerance decides assembly.
Electrical enclosures
Our press feeding systems run at plants producing sheet metal parts for electrical enclosures.
Lines and machines serving this sector
From the field
Footage of our lines running in this sector
Solar Ges C Profil Rollform Hattı / Solar C Profile Rollformin Line /Solar C Profile
Solar Ges C Profil Rollform Hattı / Solar C Profil Rollformin Line /Solar C Profile
Solar Ges C Profil Rollform Hattı / Solar Profıles Roll Formıng Line
Rollforming Line / Solar energy line / Cолнечная энергия линия
Solar Enerji Dikme Profili / Servo Sürücü Sistemleri / Steel Makina
Diagonal Roll Form Hattı / Diagonal roll forming line
Otomat Ray Klemens Ray Rollform Hattı
Pano İmalatı /Servo Sürücü Ve Rulo Sac Açma Sistemleri / Straightener Servo Feeders
Kablo Kanal Hattı & Cable Tray Line
Kanal Merdiven Hattı & Chanel Ladder Lıne
Frequently asked questions
What separates a solar mounting profile line from a standard profile line?
The hole pattern. Solar structures carry groups of holes at varying intervals along the profile, and those have to stay synchronised with forming. The line is built so the punching unit and the servo feed position together from the recipe; punching afterwards is both slower and costs you the tolerance.
Does forming damage the coating on galvanised sheet?
With the right roll design and surface hardness, forming does not strip the coating. The number of roll stations is what matters: if the section is built up gradually rather than in one step, the material is not forced. For profiles that will sit outdoors, this is directly a question of service life.
Let us size a line for your energy project
Send your profile section, hole pattern and annual capacity, and we will come back with a layout and a technical quotation.