Applications
Automotive and appliances
In these sectors the work is not roll forming but press feeding. What decides high-volume production is feed accuracy and repeatability: the sheet has to be in the same position on every stroke.
Parts produced
What we work on in these sectors
Automotive supply industry
Our feeding systems run at automotive part manufacturers in several countries, including Serbia and Italy.
Appliance parts
Our decoilers, straighteners and servo feeder lines are used at plants producing appliance sheet metal parts.
Panel radiators and grilles
Feeding systems for top cover and grille parts in heating equipment production.
Bathroom and kitchen equipment
Our compact feeding lines run at accessory and equipment manufacturers.
Lines and machines serving this sector
From the field
Footage of our lines running in this sector
Pres Besleme Sistemleri - Otomotiv Parça Üretimi - Sırbistan
Pres Besleme Sistemleri - Otomotiv Parça Üretimi - İtalya
Pres Otomotiv Rulo Sac Şekillendirme Hattı / Servo Sürücü Ve Rulo Sac Açma Sistemleri
Beyaz Eşya İmalatı /Servo Sürücü Ve Rulo Sac Açma Sistemleri
Roll Forming ,Panel Radyatör Üst Kapak Hattı..
Petek Izgara /Servo Sürücü Ve Rulo Sac Açma Sistemleri / Straightener Servo Feeders
Pres Besleme Sistemleri - Petek Izgara İmalatı
Pres Besleme Sistemleri / Banyo Aksesuarları
Frequently asked questions
Why is feed accuracy so decisive in series production?
The press has to find the sheet in the same position on every stroke. If the position drifts, the part dimension drifts with it and the die is loaded on one side, which raises both scrap and tool wear. In high-volume production a small deviation turns into a large number by the end of the day.
Can a complete feeding line fit into a tight footprint?
Yes — decoiler, straightener and servo feeder can be combined on a single platform. That is exactly what the compact line exists for: it shrinks the floor space that three separately placed machines would occupy.
Let us pick a feeding system for your press
Send your sheet thickness and width, press stroke rate and feed length, and we will come back with the right series.